Back to Great Gardens Online Homepage

Hozelock Micro Tube is designed to connect the drippers, sprinklers and misters to the main supply hose.

With this Hozelock hose you can water your flower beds and borders ensuring that the water is distributed where it is needed Porous 12.5mm (1/2 inch) diameter hose that dispenses water along its entire length

Perforated flat hose which produces a gentle sprinkler effect when used upright and a deep soaking action when reversed Supplied with end cap and screw-in connector Can be used in series Hose Length 15m

Hozelock Accessory Adaptor - Threaded adaptor with male connector. Converts female threaded accessories to male end. This part is especially usefull for connecting an automatic watering system pressure regulator to a standard Hozelock hose end connector.

Hozelock Supply Tube is used to distibute the water around the watering system The 13mm tube is used as the main distribution pipe Highly flexible and UV stable Hose Length 25m

These are used to follow the contours of the garden/greenhouse and to avoid obstacles For use with the 13mm supply tube Pack of 2

These are used to connect two pieces of the 13mm main supply hose together Also handy for fixing damaged supply tube or where a kink has formed. Pack of 2

Seals holes in supply tube and at the ends of micro tube Handy to fill a hole where a mistake has been made or a feed off the supply tube is no longer needed. Pack of 10

High quality 13mm wall clips These clips allow you to secure the main supply hose to a wall or fence Made from UV stable plastic Packs of 10

For branching the 4mm supply tube.

These 'T' adapters allow for a junction to be put into a micro hose run and are great for dripper systems and greenhouses.

Pack of 10.

Automatic watering micro tube hose stake Ideal stake for holding drippers in position Suitable for 4mm micro tube Supplied with complete fitting and usage instructions Pack of ten

Round Tap connector (max diameter 18mm) - Designed for round and oval spout taps. The fitting is sealed to the tap by tightening the stainless steel clip.

For garden and garage taps with a male threaded outlet; the fitting screws to the tap, alone or with an adaptor, for half inch BSP thread to provide a quick coupling. 3/4" BSP tap connector suitable for use with 95% of all outdoor taps.

May not be suitable for UK taps. For garden & garage taps with a 22mm BSP male threaded outlet. The fitting screws to the tap spout to provide click-on coupling with hose connectors fitted to garden hose.

Dual tap connector allows two hoses to be connected to a single tap. One or both hoses can be selected or the water can be turned off. Comes complete with a 3/4in BSP thread suitable for 95% of taps and an adaptor for older 1/2in BSP taps

Hozelock hose repair connector for repairing damaged hose or permanently connecting two lengths of hose. - for 12.5mm hose

Double-ended male connector allowing two lengths of hose equipped with female connectors to be joined.

Integral valve automatically shuts off the hose supply when the fitting is uncoupled so there is no need to return to the tap. For 12.5-15mm (1/2 inch - 5/8 inch) hose