Hozelock hose repair connector for repairing damaged hose or permanently connecting two lengths of hose. - for 12.5mm hose
Allows the water supply to be divided up into four outlets including up to two with electronic timers. Can be used with or without the wall bracket supplied and can be used anywhere in the garden by running a length of hose from the tap to the 4 Way Connector.
Dual tap connector allows two hoses to be connected to a single tap. One or both hoses can be selected or the water can be turned off. Comes complete with a 3/4in BSP thread suitable for 95% of taps and an adaptor for older 1/2in BSP taps
For garden and garage taps with a male threaded outlet; the fitting screws to the tap, alone or with an adaptor, to provide a coupling. Replaceable internal washers. 1" BSP female thread
For garden and garage taps with a male threaded outlet; the fitting screws to the tap, alone or with an adaptor, for half inch BSP thread to provide a quick coupling. 3/4" BSP tap connector suitable for use with 95% of all outdoor taps.
Round Tap connector (max diameter 18mm) - Designed for round and oval spout taps. The fitting is sealed to the tap by tightening the stainless steel clip.
Round Mixer Tap connector (max diameter 24mm) - Designed to suit the normally larger spout of a mixing tap. The fitting is sealed to the tap by tightening the stainless steel clip.
Integral valve automatically shuts off the hose supply when the fitting is uncoupled so there is no need to return to the tap. For 12.5-15mm (1/2 inch - 5/8 inch) hose
Hozelock hose repair connector for repairing damaged hose or permanently connecting two lengths of hose. - for 19mm (3/4 in) hose
Designed to fit a wide variety of square, round and mixer taps to to 43 mm high and by 34 mm wide. Complete with a choice of sealing washers to provide a leak-free connection.
Hozelock Accessory Adaptor - Threaded adaptor with male connector. Converts female threaded accessories to male end. This part is especially usefull for connecting an automatic watering system pressure regulator to a standard Hozelock hose end connector.
Double-ended male connector allowing two lengths of hose equipped with female connectors to be joined.
Three-way connector designed to branch a hose in two directions. Ideally used with water stop connectors so that the water will stop flowing when you remove sprayers etc from the hose
May not be suitable for UK taps. For garden & garage taps with a 22mm BSP male threaded outlet. The fitting screws to the tap spout to provide click-on coupling with hose connectors fitted to garden hose.
Pressure regulator attaches to outside tap. It reduces the pressure of the water to 20 PSI (1.5 bar), this ensures that the micro irrigation system is not over pressurised, and that performance is optimised. There is an integral filter to prevent dirty water affecting dripper performance
Hozelock Supply Tube is used to distibute the water around the watering system The 13mm tube is used as the main distribution pipe Highly flexible and UV stable Hose Length 25m
In-line 13mm valve shuts off or adjusts the flow in the 13mm supply tube
These are used to follow the contours of the garden/greenhouse and to avoid obstacles For use with the 13mm supply tube Pack of 2
These are used to add additional runs to your watering system and are great for greenhouses and gardens For use with 13mm supply hose Pack of 2
These are used to connect two pieces of the 13mm main supply hose together Also handy for fixing damaged supply tube or where a kink has formed. Pack of 2
For closing off the end of the 13mm supply tube. Pack of 3
These are used to secure the main supply hose to the ground These are great around the garden and ideal for the greenhouse Made from UV stable plastic Pack of 5
High quality 13mm wall clips These clips allow you to secure the main supply hose to a wall or fence Made from UV stable plastic Packs of 10
Hozelock Micro Tube is designed to connect the drippers, sprinklers and misters to the main supply hose.
Automatic watering flow control valve In line 4mm flow control valve for supply tube It either shuts of or adjusts the flow of supply tube Supplied with complete fitting and usage instructions Pack of two
Use the Advanced Search facility below to search our products by keyword and/or price range.
Keywords :
Words : or and
Price Range : Any Less than £5.00 £5.00 to £25.00 £25.00 to £50.00 £50.00 to £100.00 Above £100.00
Jump to page top